Bemærk! Specifikationerne for hver type er forskellige, se venligst nøje på

Taker F722BLs 60A V2-stak

funktioner

1. brug den almindelige stm32f722-chip

2. udstyret med det nyeste 42688-p gyroskop 

3. 16m sort boksopbevaring

4. integreret lc-filter

5. opgrader type-c usb-grænseflade

6. direkte tilsluttet d ji luftenheden

7. Med Taker H60_BLS 60A 4in1 ESC er den flyvende følelse silkeblød

8. Enkel og rimelig installationsmetode, støddæmperen kan få gyroskopet til at fungere meget stabilt

9. 9v@2.5a + 5v@3a dobbelt uafhængig bec

specifikationer

GEP-F722-HD V2 Flycontroller

• MCU: stm32f722

• imu: icm42688-p(spi)

• Tilslutning af luftenhed: Direkte tilslutning til d ji-luftenhed

• sort boks: 16 m ombord

• USB-stik: type-c

• OSD: Betaflight OSD med at7456e-chip

• bec: 5v@3a, 9v@2.5a dobbelt bec

• firmwaremål: geprcf722

• Størrelse: 36,85×36,85 mm, hul 30,5×30,5 mm, hullet på φ4 mm bliver til φ3 mm efter brug af en stødabsorberende silikonecirkel.

• Indgangsspænding: 3-6s lipo

• uart:5

• effektfilter: integreret lc-filter

• vægt: 8,1 g

Taker H60_BLS 60A 4-i-1 ESC

• Indgangsspænding: 3-6s lipo

• galvanometer: støtte

• kontinuerlig strøm: 60a

• burststrøm: 65a (5 sekunder)

• Supportprotokol: dshot 150/300/600

• Størrelse: 42×45,7 mm, hul 30,5×30,5 mm, hullet fra φ4 mm bliver til φ3 mm efter brug af den stødabsorberende silikonering.

• vægt: 14,9 g

• mål: b_x_30

inkluderer

1 x flycontroller

1 x ESC

1 x kondensator

1 x D-JI-luftenhedsadapterkabel

1 x flycontrolleradapterkabel

1 x XT60 strømkabel

4 x M3*30 skruer

4 x M3*25 skruer

8 x nylonmøtrikker

8 x silikonegummier 2 x

SH1.0 4-bens silikonekabel

1 x kameratilslutningskabel

Taker f722bls 65a v2 stak

funktioner

1. bruger den almindelige stm32f722-chip

2. equipped with the latest 42688-p gyroscope

3. 16m onboard black box storage

4. integrated lc filter

5. upgraded type-c usb interface

6. directly plugs into the d ji air unit

7. paired with the taker h65_8s_bls 65a 4in1 esc, providing a smooth flying experience

8. simple and efficient installation method with shock absorbers for stable gyroscope performance

9. dual independent becs: 9v@2.5a and 5v@3a

specifications

gep-f722-hd v2 flight controller

• mcu: stm32f722

• imu: icm42688-p(spi)

• air unit connection:direct plugging into d ji air unit

• black box: 16m onboard

• usb interface: type-c 

• barometer: supported

• osd: betaflight osd w/ at7456e chip

• bec: 5v@3a,9v@2.5a dual bec

• firmware target: geprcf722

• dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• input voltage: 3-6s lipo 

• uart: 5

• power filter: integrated lc filter

• weight: 8.1g

taker h65_8s_bls 65a 4in1 esc

• input voltage: 3-8s lipo

• ammeter: supported

• continuous current：65a

• burst current：70a（5 seconds）

• support protocol: dshot 150/300/600

• dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• weight: 14.9g

• firmware target: b_x_30

includes

1 x fc board

1 x esc board

1 x capacitor

1 x d ji air unit adapter cable

1 x flight controller adapter cable

1 x xt60 power cable

4 x m3*30 screws

4 x m3*25 screws

8 x nylon nuts

8 x silicone anti-shake pads

2 x sh1.0 4pin silicone cable

1 x camera connection cable


 

taker f722bls 80a v2 stack

features

1.  use mainstream stm32f722 chip

2.  equipped with the latest 42688-p gyroscope 

3.  16m black box storage

4.  integrated lc filter

5.  upgrade type-c usb interface

6.  directly plugged into the d ji air unit

7.  with taker h80_bls 80a 4in1 esc, dual mos, high current, silky flight

8.  simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

9.  9v@2.5a + 5v@3a dual independent bec

specifications

gep-f722-hd v2 flight controller

•  mcu:stm32f722

•  imu:icm42688-p(spi)

•  air unit connection:direct plugging into d ji air unit

•  black box:16m onboard

• usb interface:type-c 

• barometer: support

• osd:betaflight osd w/ at7456e chip

• bec:5v@3a,9v@2.5a dual bec

• firmware target:geprcf722

• size:36.85×36.85mm, hole 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• input voltage:3-6s lipo 

• uart:5

• power filter:integrated lc filter

• weight:8.1g

taker h80_bls 80a 4in1 esc

•  input voltage: 3-6s lipo

•  ammeter: support

•  continue current:80a

•  burst current:85a(5 second)

•  support protocol: dshot 150/300/600

•  size:56.3*61.1mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

•  weight: 28.1g

• target: b_x_30

includes

1 x flight controller

1 x esc

1 x capacitor

1 x d ji air unit adapter cable

1 x flight controller adapter cable

1 x xt60 power cable

4 x m3*30 screws

4 x m3*25 screws

8 x nylon nuts

8 x silicone grommets

2 x sh1.0 4pinsilicone cable

1 x camera connection cable