Your Cart

Rctosky ZD850 PRO M8N/M9N/M10 Fuld Kulfiber 850mm Hexa-Rotor Stel BLHELI 40A ESC PIXHAWK Flykontrol Rado Telemetri Sæt

531,00 € – 683,00 €

Farve

Clear

pixhawk pro

Pixhawk Pro understøtter den nyeste officielle Ardupilot-firmware og PX4-firmware.

1. De avancerede 32-bit ARM CortexM4 højtydende processorer STM32F427VIT6 (2MB flash) kan køre NUTTX CHIBOS RTOS realtidsoperativsystemet.

2. 14 pwm / servoudgang;

3. busgrænseflade (uart, i2c, spi, can);

4. den integrerede backup-strømforsyning og backup-controller svigter, den primære controller skifter til backup-styringen, så den er sikker;

5. tilbyde automatiske og manuelle tilstande;

6. sørge for redundant strømforsyning og failover;

7. flerfarvede LED-lys;

8. Giv en flertone-summergrænseflade

9. micro sd-optagelse af flydata;

specifikationer:

grænseflade

1,5 højspændingskompatibel UART 1, 2 med hardwareflowkontrol

2. 2 dåser

3. Spektrum DSM / DSM2 / DSM-X satellitmodtager kompatibel indgang

4. Futaba SBUS-kompatible indgange og udgange

5 ppm signalindgang

6.rssi (pwm eller spænding) indgang

7.i2c

8.spi

9.3.3 og 6.6vadc indgang

10. eksternt mikro-usb-interface

højt sæt:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro + ppm + i2c + rgb LED + oled sikkerhedsknap og buzzer + 3 linjer (4p gh1.25, 6pgh1.25, 2.54pin)

simpel pakke:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro + M8n/M9n/M10 GPS + 3-dørs strømmodul + GPS-holder + støddæmper + støddæmper sikkerhedsknap og buzzer + 3 linjer (4PGH1.25, 6PGH1.25, 2.54 pin)

Stangard-pakken:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro+ppm+i2c+ m8n/m9n/m10 GPS +3dr strømmodul+GPS-holder+støddæmper+støddæmper+sikkerhedsknap og buzzer+3 linjer (4p gh1.25, 6pgh1.25, 2.54pin)

høj pakke:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro+ppm+i2c+rgb LED+oled+ m8n/m9n/m10 GPS +3dørs strømmodul+gps-holder+støddæmper+
støddæmper+sikkerhedsknap og buzzer+3 linjer (4pgh1.25, 6pgh1.25, 2.54pin)

433/915 mhz 100 mw:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro + M8n/M9n/M10 GPS + 3-dørs strømmodul + radio V5 433/915mhz 100mw + GPS-holder + støddæmper +
sikkerhedsknap og buzzer + 3 linjer (4PGH1.25, 6PGH1.25, 2.54pin)

433/915 mhz 500 mw:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro + I2C + RGB LED + OLED + M8N/M9N/M10 GPS + 3-dørs strømmodul + Radio V5 433/915mhz 500mW + GPS-
holder + støddæmper + sikkerhedsknap og buzzer + 3 linjer (4PGH1.25, 6PGH1.25, 2.54pin)

433/915 mhz 1000 mw:

zd850 pro fuld kulfiber + 6 stk. blheli 40a børsteløs esc +

3 par 3k kulfiberpropeller 1555 + 6 stk. d4114 400kv motor +

Pixhawk Pro + I2C + RGB LED + OLED + M8N/M9N/M10 GPS + 3-dørs strømmodul + Radio OV5 433/915mhz 1000mW + GPS-
holder + støddæmper + sikkerhedsknap og buzzer + 3 linjer (4p GH1.25, 6p GH1.25, 2.54pin)

zd850 pro droneramme*1 m8n gps:

m9n gps-modul

m9n er et GPS-modul, der almindeligvis anvendes i ubemandede luftfartøjer, med følgende egenskaber og anvendelser:

high precision positioning: the m9n adopts advanced gnss technology, supports multiple satellite navigation systems, and can provide high-precision position positioning information. for unmanned aerial vehicles, it can achieve accurate positioning and navigation.

multi system support: the m9n supports multiple satellite navigation systems, including gps, glonass, galileo, beidou, etc. this allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability.

quick positioning: m9n has fast cold start and hot start times, which can quickly obtain satellite signals and perform positioning, making it crucial for the rapid takeoff and task execution of unmanned aerial vehicles.

m9n can search for more satellites outdoors with higher accuracy, faster search speed, and better stability.(the specific number of star searches is determined by the environment at that time.)

m10 gps module with ist8310 compass

m10 gps for pixhawk2.4.8: used for pixhawk2.4.8

m10 gps for pixracer r15:used for pixracer r15

m10 gps for pixhawk 6c :used for pixhawk 6c

the m10 gps uses multi-constellation gnss powered by u-blox m10 series, a concurrent gnss receiver which can receive and track multiple gnss systems. owing to the multi-band rf front-end architecture all four major gnss constellations, gps,galileo, glonass and beidou can be received concurrently.

it also comes with the ist8310 compass.this module ships with a baud rate of 115200 5hz.

the high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. it features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.

firmware support for m10 gps:

px4 1.14, ardupilot 4.3, or newer is required

1555 3k carbon fiber poropeller*3paira

6pcs d4114 400kv motor

6pcs 40a bec

features:

– using multicopter special program, fast throttle response,surpasses all kinds of open source software;

– firmware was optimized specifically for disc motor, and it has a very good compatibility;

– highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use;

– throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight;

– supports refresh rates up to 621hz throttle signal, compatible with various flight controllers. (note: the throttle signal over 500hz are all non-standard throttle signal);

– using mosfet special driver ic, its performance and stability far surpass the driving circuit with discrete components built;

– ultra-low resistance mosfet, strong flow capacity.

oled module can display some message.

radio telemetry can be used for wireless communication between pixhawk and computer or mobile phone.

specifications

brand name: rctosky

for vehicle type: airplanes

four-wheel drive attributes: assemblage

hign-concerned chemical: none

is batteries included: no

is electric: no battery

is it battery/power supply: n

is it charger/adapter: n

material: carbon fiber

model number: pro m8n m9n m10

origin: mainland china

quantity: 1 pcs

rc parts & accs: radio systems

recommend age: 14+y

remote control peripherals/devices: remote controller

size: zd850

technical parameters: kv1100

tool supplies: assembled class

upgrade parts/accessories: frame

use: vehicles & remote control toys

wheelbase: bottom plate