Your Cart

FPV LX1100 6C PRO M8N M9N M10 Fuld Kulfiber 1100mm Hexa-Rotor Stel B-CUBE 80A ESC PX4 Pixhawk Flykontrolsæt 6215 Motor

2 203,00 € – 2 483,00 €

Farve

Clear

rctosky lx1100 6-akslet hexakopter

Pixhawk 6c pro

simpel kollokation:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro+ 2*PWM-moduler+sikkerhedsknap+4c TF-kort

simpel pakke:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro + 2′ PWM-modul + sikkerhedsknap + 4G TF-kort + m8n/m9n/m10 GPS + GPS-holder + støddæmper + pm02 v3.2 strømmodul (understøtter 12 sekunder)

høj pakke:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro + 2*PWM-modul + I2C-udvidelseskort + RGB LED-modul + sikkerhedsknap + 4G TF-kort + M8N/M9N/M10 GPS + GPS-holder + støddæmper + PM02 v3.2 strømmodul (understøtter 12 sekunder)

Wi-Fi v3.0:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro + 2*PWM-modul + sikkerhedsknap 4G TF-kort + M8N/M9N/M10 GPS + GPS-holder + støddæmper wifi v3.0 + PM02 v3.2 strømmodul (understøtter 12s)

433 mhz/915 mhz 100 mw:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro + 2*PWM-modul + sikkerhedsknap + 4G TF-kort + M8N/M9N/M10 GPS + GPS-holder + støddæmper + PM02 v3.2 strømmodul (understøtter 12 sekunder) + radiotelemetri v6 433/915mhz 100mw

433 mhz/915 mhz 500 mw:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro + 2*PWM-modul + I2C-udvidelseskort RGB LED-modul + sikkerhedsknap + 4G TF-kort + M8N/M9N/M10

GPS + GPS-holder + støddæmper + pm02 v3.2 strømmodul (understøtter 12 sekunder) + radiotelemetri v6 433/915 mhz 500 mw

433 mhz/915 mhz 1000 mw:

lx1100 fuld kulfiber + 6 stk. b-cube 80a børsteløs esc +

3 par 3k kulfiberpropeller 2255 + 6 stk. 6215 170kv motor +

Pixhawk 6c pro + 2*PWM-modul + I2C-udvidelseskort + RGB LED-modul + sikkerhedsknap + 4G TF-kort + M8N/M9N/M10

GPS + GPS-holder + støddæmper + pm02 v3.2 strømmodul (understøtter 12 sekunder) + radiotelemetri v6 433/915 mhz 1000 mw

m8n gps:

Forsyningsspænding 1,65 V til 3,6 V (m8m)

2,7 V til 3,6 V (m8n/q)

strømforbrug4 23 ma @ 3,0 v (kontinuerlig)

5 ma @ 3,0 V strømsparetilstand

(1 Hz, kun GPS-tilstand)

backupforsyning 1,4 til 3,6 V

m9n gps-modul

m10 gps-modul med ist8310 kompas

lx1100 6-akslet

6215 170kv motor (understøtter 6s-12s)

b-cube-pro-80a-hv v3 esc

b-cube-pro-80a-hv v3 til multikopter

specifikation:

Spænding: 6-14s lithiumbatteri. Strøm 80A. Vægt 195g

uden beh. uden ventilator (intet behov for ventilator)

Strømledning (rød og sort linje) nr. 12 silikonetråd, længde: 14 cm.

motorledning (3 sorte linjer) nr. 14 silikonetråd, længde: 70 cm

Signallinje (sort og hvid linje) længde: 25 cm

skal vandtæt.

model: b-cube-pro-80a-hv v3 esc

køretilstand: bldc

fortsætter strøm: 80a

øjeblikkelig strøm (10 sekunder): 100a

Udgangs litiumbatteri sektionsnummer: 6-14s

Parameterprogrammeringsfunktioner: automatisk vinkel (høj / medium)

01 advarsler

 Sørg for, at alle ledninger og forbindelser er godt isolerede, før du tilslutter ESC’en til relaterede enheder, da kortslutning vil beskadige din ESC.

 ensure all devices are well connected to prevent poor connection that may cause your multi-rotor to lose control or other unpredictable issues such

as damage to the device.

 read through the manuals of all power devices and ensure the power configuration is rational before using this unit.

 please use a soldering iron (ensuring it’s connected to a gnd wire) with the power of at least 60w to solder all input/output wires and connectors.

 stop using the esc when its casing temperature exceeds 100℃, otherwise your esc will get destroyed and may also get your motor damaged.

 please swap any two esc-to-motor wires if the motor runs in reverse.

02 features

 special core program for multi-rotor controllers greatly improves throttle response.

 specially optimized software for excellent compatibility with multi-rotor motors.

 microprocessor powered by independent dc regulator has better anti-interference performance greatly reduces the risk of losing control.

 separate signal wires for reminding user of rpm output & error states.

 all settings except the timing are preset, making usage simple, high intelligent and adaptive.

 compatible with various flight-controller and supports a signal frequency of up to 621hz.

 deo (driving efficiency optimization) technology for better throttle linearity and higher driving efficiency.

 pwm frequency of 18khz.

3 pairs 3k carbon fiber propeller

the new propeller-type aerial dedicated full carbon paddle paddle-type three-hole installation

using carbon content of 100% pure imported toray carbon fiber 3k woven, high temperature and pressure precast precision machining, hardness higher than conventional products market.

radio telemetry v6:

specifications

brand name: mkjfe

for vehicle type: airplanes,airplanes

four-wheel drive attributes: assemblage,assemblage

hign-concerned chemical: none,none

is batteries included: no

is electric: no battery,no battery

is it battery/power supply: n

is it charger/adapter: n

material: eva

model number: f1100,f1100

origin: mainland china

quantity: 1 pcs,1 pcs

rc parts & accs: axle

recommend age: 14+y

remote control peripherals/devices: remote controller

size: f1100,f1100

technical parameters: kv1100,kv1100

tool supplies: assembled class,assembled class

upgrade parts/accessories: frame

use: vehicles & remote control toys

wheelbase: bottom plate,bottom plate